Using rpy2 in notebooks¶
Part of the documentation is already also available as jupyter notebooks:
However this section shows how specific rpy2 features are designed for notebooks.
Note
This section is available as a jupyter notebook jupyter.ipynb (HTML render: jupyter.html)
from functools import partial
from rpy2.ipython import html
html.html_rdataframe=partial(html.html_rdataframe, table_class="docutils")
Data Import¶
We choose to use an external dataset to demonstrate how R’s own data import features can be used.
from rpy2.robjects.packages import importr
utils = importr('utils')
dataf = utils.read_csv('https://raw.githubusercontent.com/jakevdp/PythonDataScienceHandbook/'
'master/notebooks/data/california_cities.csv')
The objects returned by R’s own read.csv() function (note that the R
function in the R package utils is called read.csv() while the
Python function is called read_csv() - rpy2 converts R symbols
with dots to underscores for Python).
rpy2 provides customization to display R objects such as data frames
in HTML in a notebook. That customization is enabled as follows:
import rpy2.ipython.html
rpy2.ipython.html.init_printing()
dataf
| X | city | latd | longd | ... | area_water_km2 | area_water_percent | ||
|---|---|---|---|---|---|---|---|---|
| 0 | 1 | 0 | Adelanto | 34.57611111111112 | -117.43277777777779 | ... | 0.046 | 0.03 |
| 1 | 2 | 1 | AgouraHills | 34.15333333333333 | -118.76166666666667 | ... | 0.076 | 0.37 |
| 2 | 3 | 2 | Alameda | 37.75611111111111 | -122.27444444444444 | ... | 31.983 | 53.79 |
| 3 | 4 | 3 | Albany | 37.886944444444445 | -122.29777777777778 | ... | 9.524 | 67.28 |
| 4 | 5 | 4 | Alhambra | 34.081944444444446 | -118.135 | ... | 0.003 | 0.01 |
| 5 | 6 | 5 | AlisoViejo | 33.575 | -117.72555555555556 | ... | 0.0 | 0.0 |
| 6 | 7 | 6 | Alturas | 41.48722222222222 | -120.5425 | ... | 0.036000000000000004 | 0.57 |
| 7 | 8 | 7 | AmadorCity | 38.419444444444444 | -120.82416666666666 | ... | 0.0 | 0.0 |
| ... | ... | ... | ... | ... | ... | ... | ... | ... |
| 480 | 481 | 480 | Yucaipa | 34.030277777777776 | -117.04861111111111 | ... | 0.013000000000000001 | 0.02 |
| 481 | 482 | 481 | YuccaValley | 34.13333333333333 | -116.41666666666667 | ... | 0.0 | 0.0 |
dataf.colnames
| X | city | latd | longd | elevation_m | elevation_ft | population_total | area_total_sq_mi | ... | area_water_km2 | area_water_percent |
stats = importr('stats')
base = importr('base')
stats.lm('elevation_m ~ latd + longd', data=dataf)
| 0 | coefficients | (Intercep... |
| 1 | residuals | ... |
| 2 | effects | ... |
| 3 | rank | [1] 3 |
| 4 | fitted.values | ... |
| 5 | assign | [1] 0 1 2 |
| 6 | qr | $qr ... |
| 7 | df.residual | [1] 431 |
| ... | ... | ... |
| 11 | terms | elevation... |
| 12 | model | ... |
Graphics¶
R has arguably some the best static visualizations, often looking more polished than other visualization systems and this without the need to spend much effort on them.
Using ggplot2¶
Among R visulization pacakges, ggplot2 has emerged as something
Python users wished so much they had that various projects to try port
it to Python are regularly started.
However, the best way to have ggplot2 might be to use ggplot2
from Python.
import rpy2.robjects.lib.ggplot2 as gp
Calling ggplot2 looks pretty much like it would in R, which allows
one to use the all available documentation and examples available for
the R package. Remember that this is not a reimplementation of ggplot2
with inevitable differences and delay for having the latest changes: the
R package itself is generating the figures.
p = (gp.ggplot(dataf) +
gp.aes_string(x='longd',
y='latd',
color='population_total',
size='area_total_km2') +
gp.geom_point() +
gp.scale_color_continuous(trans='log10'))
Plotting the resulting R/ggplot2 object into the output cell of a notebook, is just function call away.
from rpy2.ipython.ggplot import image_png
image_png(p)
All features from ggplot2 should be present. A more complex example
to get the figure we want is:
from rpy2.robjects.vectors import IntVector
p = (gp.ggplot(dataf) +
gp.aes_string(x='longd',
y='latd',
color='population_total',
size='area_total_km2') +
gp.geom_point(alpha=0.5) +
# Axis definitions.
gp.scale_x_continuous('Longitude') +
gp.scale_y_continuous('Latitude') +
# Custom size range.
gp.scale_size(range=IntVector([1, 18])) +
# Transform for pop -> color mapping
gp.scale_color_continuous(trans='log10') +
# Title.
gp.ggtitle('California Cities: Area and Population') +
# Plot theme and text size.
gp.theme_light(base_size=16))
image_png(p)
Using ggplot2 extensions¶
There existing additional R packages extending ggplot2, and while it
would be impossible for the rpy2 to provide wrapper for all of them the
wrapper for ggplot2 is based on class hierarchies that should make
the use of such extensions really easy.
For example, to use the viridis color scale, we just need to import the
corresponding R package, and write 3 lines of Python to extend
rpy2’s ggplot2 wrapper with a new color scale. A clas diagram with
the classes in the rpy2 wrapper for ggplot2 is available in the rpy2
documentation.
viridis = importr('viridis')
class ScaleColorViridis(gp.ScaleColour):
_constructor = viridis.scale_color_viridis
scale_color_viridis = ScaleColorViridis.new
That new color scale can then be used as any other scale already present
in ggplot2:
p = (gp.ggplot(dataf) +
gp.aes_string(x='longd',
y='latd',
color='population_total',
size='area_total_km2') +
gp.geom_point(alpha=0.5) +
gp.scale_x_continuous('Longitude') +
gp.scale_y_continuous('Latitude') +
gp.scale_size(range=IntVector([1, 18])) +
scale_color_viridis(trans='log10') +
gp.ggtitle('California Cities: Area and Population') +
gp.theme_light(base_size=16))
image_png(p)
So far we have shown that using ggplot2 can be done from Python as
if it was just an other Python library for visualization, but R can also
be used in cells.
First the so-called “R magic” extension should be loaded.
%load_ext rpy2.ipython
From now on, code cells starting with %%R will see their content
evaluated as R code. If the R code is generating figures, they will be
displayed along with the rest of the output.
%%R
R.version.string
[1] "R version 4.0.0 RC (2020-04-21 r78271)"
%%R -i dataf
require(dplyr)
glimpse(dataf)
R[write to console]: Loading required package: dplyr
R[write to console]:
Attaching package: ‘dplyr’
R[write to console]: The following objects are masked from ‘package:stats’:
filter, lag
R[write to console]: The following objects are masked from ‘package:base’:
intersect, setdiff, setequal, union
Rows: 482
Columns: 14
$ X [3m[90m<int>[39m[23m 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, …
$ city [3m[90m<chr>[39m[23m "Adelanto", "AgouraHills", "Alameda", "Albany", "A…
$ latd [3m[90m<dbl>[39m[23m 34.57611, 34.15333, 37.75611, 37.88694, 34.08194, …
$ longd [3m[90m<dbl>[39m[23m -117.4328, -118.7617, -122.2744, -122.2978, -118.1…
$ elevation_m [3m[90m<dbl>[39m[23m 875, 281, NA, NA, 150, 127, 1332, 280, 14, 48, 132…
$ elevation_ft [3m[90m<dbl>[39m[23m 2871, 922, 33, 43, 492, 417, 4370, 919, 46, 157, 4…
$ population_total [3m[90m<int>[39m[23m 31765, 20330, 75467, 18969, 83089, 47823, 2827, 18…
$ area_total_sq_mi [3m[90m<dbl>[39m[23m 56.027, 7.822, 22.960, 5.465, 7.632, 7.472, 2.449,…
$ area_land_sq_mi [3m[90m<dbl>[39m[23m 56.009, 7.793, 10.611, 1.788, 7.631, 7.472, 2.435,…
$ area_water_sq_mi [3m[90m<dbl>[39m[23m 0.018, 0.029, 12.349, 3.677, 0.001, 0.000, 0.014, …
$ area_total_km2 [3m[90m<dbl>[39m[23m 145.107, 20.260, 59.465, 14.155, 19.766, 19.352, 6…
$ area_land_km2 [3m[90m<dbl>[39m[23m 145.062, 20.184, 27.482, 4.632, 19.763, 19.352, 6.…
$ area_water_km2 [3m[90m<dbl>[39m[23m 0.046, 0.076, 31.983, 9.524, 0.003, 0.000, 0.036, …
$ area_water_percent [3m[90m<dbl>[39m[23m 0.03, 0.37, 53.79, 67.28, 0.01, 0.00, 0.57, 0.00, …
The data frame called dataf in our Python notebook was already bound
to the name dataf in the R main namespace (GlobalEnv in the R
lingo) in our previous cell. We can just use it in subsequent cells.
%%R -w 800 --type=cairo
cat("Running an R code cell.\n")
p <- ggplot(dataf) +
aes_string(x = 'longd',
y = 'latd',
color = 'population_total',
size = 'area_total_km2') +
geom_point(alpha = 0.5) +
scale_x_continuous('Longitude') +
scale_y_continuous('Latitude') +
scale_size(range = c(1, 18)) +
scale_color_viridis(trans='log10') +
ggtitle('California Cities: Area and Population') +
theme_light(base_size=16)
print(p)
Running an R code cell.
